Welcome
Hi, here there are my research on automation , electronics and computer science topics . The explanations may not seem very comprehensive and almost synthetic but the purpose is to stimulate insights. If you would like, I am always willing to talk above all to correct myself. Thanks.
Vito BLASI.
December 15 2021
Added in LTSpice an idea of noise generator for create random pulses to simulate the operation of a Geiger-Müller ionization chamber tube.
Thank you for the excellent work on the BBC Basic prog (Plus the ESP progs) . On the BBC Prog all is working except the MOVE command, it
gives e.g MOVE 4,2 prints _GSCROLL4;2$ The LINES DEMO also prints the text at the MOVE point in the program.
I’m running CP/M 2 on an ALTAIR home brew and latest Fab GL Library on the ESP32. All else working OK including the MBAS Prog.
Any ideas please?
Hi, thanks for the appreciation of the work. I tried running the graphics test program in BBCBasic again and in my machine it is fine. The defect found seems to me to be due to the ESP32-VGA’s lack of interception of the ESCAPE character. Try the graphic.com program in the section Z80-MBC2-> ESP32 graphic and ANSI terminal-> C which contains the GSCROLL function analogous to MOVE in BBCBasic and let me know. Thanks for writing to me.
Many thanks for reply. Yes, graphic.com works perfectly. Mbasic works 100%, just the lines.bbc has the problem. If it works for you no worries, maybe just some anomaly on my setup. If I remove the MOVE lines out of the program it works fine and who would know !!!!